Glaze White Finishing Technique Using Biovarnish

White wash finishing technique can be applied to appears the rustic style. It can be done by using Biovarnish, a safe and environmentally friendly water based wood paint.

white-wash

White wash finishing technique usually performed on rustic finishing look. It is also functioned to equalize the different wood colour.

The whitewash finishing can be described by apply a little of chalk in the media. It will result white accent on furniture to expose the texture of wood.

 White wash finishing technique can be done by various type of wood paint. We will explain the white wash finishing method by using the Biovarnish, a safe and environmentally friendly wood paint from Bioindustries.

White Wash Finishing Coating Schedule

Preparation

For white wash finishing job, you can choose both brush or spray system. You will also need brass brush, brass wire, Nr. 120 sandpaper or scotbreath, Nr. 400 sandpaper. For finishing material, you can take the walnut brown Biovarnish Wood Stain, Biovarnish Clear Coat doff and Glaze White.

Brush the wood surface by brass brush to create texture of fiber direction. Sand with Nr.120 sandpaper or scot breath to smoothing and cut the fibers.

Biovarnish Wood Stain Walnut Brown Application

biovarnish wood stain walnut brown

Add water to thin the Biovarnish Wood Stain Walnut Brown by 1:2 ratio of paint and stir it well. Spray mildly for thin layer. Let it stand to dry and sand with Nr. 400 sandpaper.

 

Biovarnish Clear Coat Application

biovarnish clear coat

Apply Biovarnish Wood Stain Walnut Brown to lock the colour. Add water to adjust the denity by half part of the paint. Apply by spray method to entire surface of wood media. Let it stand to dry for an hour.

 

Glaze white Application

glaze-white

Add water to adjust the density of Glaze White. Apply by brush or spray method. When it is on half dry condition, rub with wet cloth (squeeze it first) until the white colour that left is only on fibers sidelined.

 

Biovarnish Clear Coat Application

biovarnish clear coat

Biovarnish Clear Coat doff used as final layer to protect the colour and make the matt look. Add water by half part of it and stir it well. Apply by brush or sprat method until the smooth and leveled surface is obtained and let it stand to dry for about 20 minutes.

 

The Biovarnish can be purchased by call our customer service at 0878-3934-6433 or 0822-2026-5056. You can also visit the Bio ServicePoint Jogja, Bio Service Point Jepara or Bio Service Point Cirebon.

 

Artikel ini mendapat rating 3 bintang dari total 552 orang responden